TPU vs TPH vs PVC PPF film material

TPU vs TPH vs PVC PPF: Why the Film Material Matters

Not all PPF is the same. Two cars can both be "PPF done", but one still looks perfect after years while the other has yellow, cracked film after one summer. The reason is almost always the material. This guide explains TPU, TPH and PVC films so you know exactly what you are paying for.

The Three Types of Film

TPU (Thermoplastic Polyurethane)

TPU is the material used by serious PPF brands. It is thick, very stretchy and strong, so it wraps curves cleanly and absorbs impacts from stones. Its top coat lets light scratches heal with heat. Good TPU stays clear for years even in strong sun.

TPH (Thermoplastic Hybrid)

TPH is a cheaper blend that usually contains PVC. It looks similar on day one but is harder and less stretchy. Self-healing is weak or missing, and it tends to turn yellow, go cloudy or crack after exposure to heat and UV.

PVC

PVC film is the cheapest. It is thin and stiff, gives limited protection against chips, and ages quickly. In Pakistan's summer heat it can harden and become difficult to remove.

Comparison Table

TPU TPH PVC
Stone chip protection Strong Medium Low
Self-healing Yes Weak or none No
Yellowing in sun Resists Common Common
Stretch around curves Excellent Fair Poor
Typical life 5 to 10 years 1 to 3 years Around 1 year
Removal Clean Can leave glue Can be difficult
Price Highest Medium Lowest

Why Material Matters More in Pakistan

Summer temperatures in many cities go well above 40°C, and a car parked in the sun gets even hotter on the surface. Heat and UV are exactly what break down hybrid and PVC films. Add dust, rain and rough washing, and a cheap film can look worse than unprotected paint within a year. Removing a failed film and fitting a new one costs more than doing TPU from the start.

How to Tell If You Are Getting Real TPU

  • Ask directly: "Is this TPU or TPH?" A trustworthy installer will tell you clearly.
  • Check the self-healing: lightly scratch a sample piece, then pour warm water over it. TPU marks fade, hybrid marks usually stay.
  • Feel the film: TPU is soft, thick and stretchy. Hybrid feels harder and more plastic.
  • Be careful with very low prices: a full-body job far below normal market rates almost always means a cheaper material.
  • Ask about the warranty period and what it covers.

What We Use at Auto House

All our full-body PPF packages use TPU film, in three grades: Standard (5 years), Premium (7 years) and Ultra (10 years). See how they compare in Standard vs Premium vs Ultra TPU, and check prices for your car in the PPF price in Pakistan guide. For a satin look from an international brand, there is also our 3M matte TPU package.

Frequently Asked Questions

Is TPH always bad?
It is not useless, but it does not last like TPU in hot climates. If you want PPF to protect your car for years, TPU is worth the extra cost.

Can old yellow film be removed?
Yes, but aged hybrid or PVC film can break into small pieces and leave glue, so removal takes time and should be done carefully.

Does TPU affect the paint colour?
Clear gloss TPU is almost invisible. Matte TPU gives a satin finish on purpose.

Get Real TPU Protection

Pick your car in our paint protection film collection, or WhatsApp 0300 8711630 to ask about the film and book installation.

Back to blog